To Next Page

To Previous Page

9 Visualization

Maschinenfabrik Reinhausen GmbH 2020 1096385142/08 EN ETOS

Remote behavior

You can use this parameter to select the behavior of the device in remote

operating mode. Depending on the device configuration, you can set the re-

mote behavior as follows:

▪ Through the visualization (optional)

▪ By setting the digital inputs (optional)

You can select the following settings:

Setting Description

Hardware only The device accepts commands through digital inputs.

SCADA only The device accepts commands via SCADA.

Hardware and SCADA The device accepts commands via digital inputs and

SCADA.

Table21: Selecting remote behavior

USB interface

You can use this parameter to deactivate the USB interface. You can select

the following options:

▪ On: USB interface is activated

▪ Off: USB interface is deactivated

9.2.2 Set up automatic logout

You can change the settings so that the device of a logged-in user automati-

cally logs the user out after a certain period of inactivity.

These settings apply to all users. If you have activated the Auto login

[►Section 9.34.3, Page 318] function for a user, then this user will not be

automatically logged out.

Questions and Answers:

Need help?

Do you have a question about the MR ETOS ED and is the answer not in the manual?

MR ETOS ED Specifications

General