To Next Page

To Previous Page

9 Visualization

Maschinenfabrik Reinhausen GmbH 2020 1156385142/08 EN ETOS

Broker address

If you use a URL address, you can use this parameter to enter the domain

name of the MQTT server (broker). Otherwise, you can enter the IP address

of the MQTT server.

Broker port

You can use this parameter to set the port of the MQTT server (broker). The

following ports are used as standard:

▪ 8883 (SSL/TLS)

▪ 1883

Client username (optional)

You can use this parameter to set the client user name for authentication at

the broker. When using authentication, you must configure the broker ac-

cordingly.

Password (optional)

You can use this parameter to set the password for authentication at the bro-

ker. When using authentication, you must configure the broker accordingly.

SSL/TLS encryption

You can use this parameter to set whether the data should be transmitted

over an SSL/TLS-encrypted connection.

Note that an encrypted data transmission does not work if you are using an

SSL proxy.

Questions and Answers:

Need help?

Do you have a question about the MR ETOS ED and is the answer not in the manual?

MR ETOS ED Specifications

General