9 Visualization
Maschinenfabrik Reinhausen GmbH 2020134 6385142/08 ENETOS
®
ED
Baud rate
You can use this parameter to set the serial interface's baud rate. You can
select the following options:
▪ 9600 baud
▪ 19200 baud
▪ 38400 baud
▪ 57600 baud
▪ 115200 baud
9.8.6.2 Device address
You can use this parameter to set the device link address.
9.8.6.3 Destination address
You can use this parameter to set the destination master link address.
9.8.6.4 Unsolicited messages
You can use this parameter to set whether the device is to support unso-
licited messages. If you activate unsolicited messages, the device sends a
message via the control system every time a value is changed.
9.8.6.5 Repetition of unsolicited messages
You can use this parameter to set how often the device is to send an unso-
licited message until it receives a response from the DNP3 master.
9.8.6.6 Repeat unsolicited messages indefinitely
You can use this parameter to set the device to send an indefinite number of
unsolicited messages until it receives a response from the DNP3 master.
9.8.6.7 Timeout
You can use this parameter to set the timeout for unsolicited messages.
9.8.6.8 Timeout for response confirmation
You can use this parameter to set the timeout for response confirmation for
unsolicited messages.
9.8.6.9 User ID code
You can use this parameter to set the user ID code.
To Next Page
Loading...
Need help?
General
