The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Firmware Update > Manual Update.
The Firmware Update page displays.
5.
Click the Browse button.
6.
Locate and select the router firmware file you downloaded.
The firmware file name ends in .img.
7.
Click the Upload button.
The upload process starts.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt
the upgrade. For example, do not close the browser, click a link, or load a
new page. Do not turn off the router.
When the upload is complete, your router restarts. The update process typically
takes about two minutes.
Change the admin password
This feature lets you change the default password that is used to log in to the router
with the user name admin. This password is not the one that you use to access the Orbi
WiFi network.
NOTE: Be sure to change the admin password to a secure password. The
ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30
characters.
To set the password for the user name admin:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
User Manual106Mantain and Monitor Your
Network
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
