5.
From the Internet Connection Type menu, select the IPv6 connection type.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type
that is in use.
6.
Click the Apply button.
Your settings are saved.
Use auto detection for an IPv6 Internet connection
To set up an IPv6 Internet connection through auto detection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced > IPv6.
The IPv6 page displays.
5.
From the Internet Connection Type menu, select Auto Detect.
The page adjusts.
The router automatically detects the information in the following fields:
•
Connection Type: This field indicates the connection type that is detected.
•
Router’s IPv6 Address on WAN: This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN: This field shows the IPv6 address that is acquired
for the router’s LAN (or local network) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the
IPv6 address. If no address is acquired, the field displays Not Available.
User Manual38Specify Your Internet Settings
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
