If the service that you want to add is not in the menu, create a custom service. See
Add a custom port forwarding service on page 130.
9.
In the Server IP Address field, enter the IP address of the computer that must provide
the service.
10.
Click the Add button.
The service displays in the table.
Add a custom port forwarding service
To add a custom service:
1.
Find out which port number or range of numbers the application uses.
You can usually find this information by contacting the publisher of the application
or user groups or news groups.
2.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
3.
Enter orbilogin.com.
A login window displays.
4.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6.
Leave the Port Forwarding radio button selected as the service type.
7.
Click the Add Custom Service button.
The Ports - Custom Services page displays.
8.
In the Service Name field, enter a descriptive name.
9.
In the Protocol menu, select the protocol.
If you are unsure, select TCP/UDP.
User Manual130Customize Internet Traffic Rules
for Ports
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
