NETGEAR Orbi RBE970 User Manual

Manage blocked devices currently not on the network
If you set up an access control list (ACL) that allows all new devices to access the network,
you can add new devices that must be blocked from accessing the network, remove
old devices, or change whether devices that were blocked must now be allowed when
they try to connect to the network.
To manage blocked devices currently not on the network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Security > Access Control.
The Access Control page displays.
5.
Click the View list of blocked devices not currently connected to the network
link.
The Access Control page displays.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the network.
In the following steps, we refer to the list of blocked devices not currently connected
to the network as the list of blocked devices.
6.
To add a device to the list of blocked devices, do the following:
a.
Click the Add button.
The Add Blocked Device page displays.
b.
Enter the MAC address and device name for the device that you want to block.
c.
On the Add Blocked Device page, click the Apply button.
The device is added to the list of blocked devices.
User Manual59Control Access to the Internet
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English