NETGEAR Orbi RBE970 User Manual

The page adjusts.
The Address Reservation table displays the IP address, device name, and MAC
address for each device that the router detects on its network.
6.
Do one of the following:
•
To reserve an IP address for a device that is already on the network, select the
radio button for the device.
•
To reserve an IP address for a device that not on the network, do the following:
a.
In the IP Address field, type the IP address to assign to the device.
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x.
b.
In the MAC Address field, type the MAC address of the device.
c.
In the Device Name field, type a name for the device
7.
Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the device contacts the
router’s DHCP server. Reboot the device, or access its IP configuration and force a
DHCP release and renew.
Edit a reserved IP address
To edit a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
User Manual90Specify Network Settings
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English