NETGEAR Orbi RBE970 User Manual

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
Clear the Use Router as DHCP Server check box.
6.
Click the Apply button.
7.
(Optional) If this service is disabled and no other DHCP server is on your network,
set your computer and device IP addresses manually so that they can access the
router.
Manage reserved LAN IP addresses
When you specify a reserved IP address for a computer on the LAN, that computer
always receives the same IP address each time it accesses the router’s DHCP server.
Assign reserved IP addresses to computers or devices that require permanent IP settings.
Reserve an IP address
To reserve an IP address:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the Address Reservation section of the page, click the Add button.
User Manual89Specify Network Settings
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English