To change the WAN preference back to the 10G Internet port:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > Internet Setup.
The Internet Setup page displays.
5.
In the WAN Preference section, select the Internet port (10 Gbps) radio button.
6.
Click the Apply button.
Your settings are saved.
7.
Disconnect the 10G Ethernet port from the Ethernet port on the modem.
Leave the 10G Internet port connected to the other Ethernet port on the modem.
Manage Dynamic DNS
Internet service providers (ISPs) assign numbers called IP addresses to identify each
Internet account. Most ISPs use dynamically assigned IP addresses. This means that the
IP address can change at any time. You can use the IP address to access your network
remotely, but most people don’t know what their IP addresses are or when this number
changes.
To make it easier to connect, you can get a free account with a Dynamic DNS service
that lets you use a domain name to access your home network. To use this account, you
must set up the router to use Dynamic DNS. Then the router notifies the Dynamic DNS
service provider whenever its IP address changes. When you access your Dynamic DNS
account, the service finds the current IP address of your home network and automatically
connects you.
User Manual80Specify Network Settings
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
