9.
Click the LOGIN AGAIN button.
A login window displays.
10.
With your new admin password, log in to the router.
Always use HTTPS to access the router
You can configure the router to require HTTPS connections between your web browser
and the router web interface, for example, “https://www.orbilogin.com”. When you
enable the HTTPS requirement, connection requests to the router web interface that
specify HTTP are automatically converted to HTTPS.
NOTE: After you enable the HTTPS requirement, when you visit
https://www.orbilogin.com, your browser might display a security warning
because of the self-signed certificate on the router. This is expected behavior.
You can proceed, or add an exception for the security warning. For more
information, visit
kb.netgear.com/000062980/what-to-do-incase-of-security-message.
To require HTTPS connections:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced > Web Services Management.
The Web Services Management page displays.
5.
Select the Always Use HTTPS to Access Router check box.
6.
Click the Apply button.
Your settings are saved.
User Manual109Mantain and Monitor Your
Network
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
