10.
In the External Port range field, enter the port numbers.
11.
Specify the internal ports by one of these methods:
•
Leave the Use the same port range for Internal port check box selected.
•
Type the port numbers in the Internal port range field.
12.
Type the IP address in the Internal IP address fields or select the radio button for
an attached device listed in the table.
13.
Click the Apply button.
Your settings are saved. The service is now in the table on the Port Forwarding / Port
Triggering page.
Edit a port forwarding service
To edit a port forwarding entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5.
Leave the Port Forwarding radio button selected as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the Edit Service button.
The Ports - Custom Services page displays.
User Manual131Customize Internet Traffic Rules
for Ports
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
