NETGEAR Orbi RBE970 User Manual

The BASIC Home page displays.
4.
Select ADVANCED > Advanced > Static Routes.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6.
Click the Delete button.
The route is removed from the table.
Change the router back to router mode
If you set up your Orbi router as an access point, you can change it back to a router.
To change the router back to router mode:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced > Router / AP Mode.
The Router / AP Mode page displays.
5.
Select the Router Mode radio button.
The page adjusts.
6.
Click the Apply button.
Your settings are saved and the router restarts.
User Manual95Specify Network Settings
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English