1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
- 300 -
Table of setting items in the device setup screen
z
Shaded areas are factory-set values.
Item Details
Hub Link Setting Auto
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half
Sets the connection mode to the hub.
Network Factory Defaults Execute Restores the settings such as network, mail
server, LDAP server, and secure protocol
server, etc., to their default values.
îš„
USB Setup
z
Shaded areas are factory-set values.
Item Details
USB Enable
Disable
Enables/disables access using a USB interface.
Speed
480Mbps
12Mbps
Sets the maximum baud rate using a USB interface.
Soft Reset
Enable
Disable
Enables/disables the software reset command.
Serial Number
Enable
Disable
Enables/disables the USB serial number.
The USB serial number is used to identify USB
devices connected to a PC.
Ofine Receive
Enable
Disable
Sets whether to receive data even if ofine or a
recoverable error occurs.
To Next Page
Loading...
Need help?
General
