1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
- 312 -
Table of setting items in the device setup screen
z
Shaded areas are factory-set values.
Item Details
Letter O Style Enable
Disable
Species the style that replaces φ (9B)and ¥ (9D)
with φ (ou) and Φ (zero).
Zero Character
Normal
Slashed
Speciîš¿es the style of 0 (zero).
SLASHED: SLASH ZERO
Line Pitch
6 LPI
8 LPI
Sets line space.
White Page Skip
On
Off
Sets whether ejecting a blank sheet or not.
CR Function
CR
CR+LF
Sets performance when CR code is received.
Line Length
80 column
136 column
Speciîš¿es the number of characters per line.
Form Length
11 inch
11.7 inch
12 inch
Speciîš¿es the length of paper.
TOF Position
0.0 inch
0.1 inch
~
1.0 inch
Sets the position from the top edge of paper.
Left Margin
0.0 inch
0.1 inch
~
1.0 inch
Sets the amount to shift the horizontal print start
position to the right.
Fit to Letter
Enable
Disable
Sets the printing mode that can îš¿t print data,
equivalent to 11 inches (66 lines), in the LETTER-
size printable area.
Text Height
Same
Diff
Sets height of a character.
Continuous Paper Mode
On
Off
Sets to Landscape the edit direction of paper
supported by A3 printer.
îš„
Color Setup
z
Shaded areas are factory-set values.
Item Details
Ink Simulation Off
SWOP
ISO Coated
Japan
Sets the ink simulation. This setting is enabled only
for PS language jobs.
UCR
Low
Medium
High
You can select the black plate (black) amount
during color printing.
Setting more black plate economizes on the toner
of the other three colors.
CMY 100% Density
Enable
Disable
Enables and disables 100% output over the CMY
100% shade values.
CMYK Conversion
On
Off
You can select the method of total toner amount
control for CMYK data. Select [Off] to disable the
GCR (Gray Component Replacement).
Further, this menu setting is disabled if using the
ink simulation function.
Spot Color
*1
*1: Displayed with C941/ES9541dn only.
White
Clear
Displays the spot color information.
The setting is enabled after the printer is restarted.
To Next Page
Loading...
Need help?
General
