To Next Page

To Previous Page

4-8

4-6. Automatic Flap Control

The flap position can be selected from 5 positions.

Operating mode Flap position

Cooling/Dry F1・F2・F3

Fan F1・F2・F3・F4・F5

Heating F1・F2・F3・F4・F5

① The ﬂ ap moves to the following position automatically when the indoor unit is stopped.

F0 (close): Types K1, T1, U1, Y1

F5: Models other than the above

② The ﬂ ap closes once and moves to the set position when the operating mode is changed.

※ If the flap position cannot be adjusted because of a problem, only the swing operation can be

used. Check the ﬂ ap and ﬂ ap motor.

※ The swing operation can be set for the ﬂ ap.

4-7. Filter Sign

① When accumulated operating time of the indoor unit reaches the set time, the ﬁ lter sign appears on

the remote controller. Clean the ﬁ lter.

Refer to “7-3. Detailed Setting Function: Simple setting items and Filter sign ON times for each model”.

② After cleaning the ﬁ lter, press the ﬁ lter button on the remote controller once. The ﬁ lter sign turns off.

Sec4.indd8Sec4.indd8 2012/03/0717:35:202012/03/0717:35:20

Panasonic R410A User Manual

Other manuals for Panasonic R410A