Ricoh MD-P2 User Manual

Configuration Page Information
Overview
The configuration page for this model has information about the machine's status. Print this sheet as
shown below. Check the configuration page when doing machine maintenance.
To Print the Configuration Page from the Machine
Before turning on the machine
1.
Hold down the "OK" key, and then turn on the main switch of the printer with holding down the
"OK " key.
2. Keep holding down the "OK" key for approximately 5 seconds.
When the machine is power-on
1. Press "Menu" key.
2. Press the "
" or " " key to select "List/Test Print", and then press the "#Enter" key.
3.
Press the "#Enter" key at the "Config. Page".
Configuration Page Information
173
5

Ricoh MD-P2 Specifications

General

Brand	Ricoh
Model	MD-P2
Category	Copier
Language	English