Main SP Tables: 1
This is a collection of the most commonly used SP codes.
Service Mode
SP1-XXX (Service Mode)
1001 Bit Switch
001 Bit Switch 1 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 No I/O Timeout 0: Disable 1: Enable
Enable: The MFP I/O Timeout setting will have no effect. I/O Timeouts will never
occur.
bit 4 SD Card Save Mode 0: Disable 1: Enable
Enable: Print jobs will be saved to an SD Card in the GW SD slot (
"Card Save
Function" in "System Maintenance" chapter of the Field Service Manual).
bit 5 DFU - -
bit 6 DFU - -
bit 7 [RPCS,PCL]: Printable area frame border 0: Disable 1: Enable
Enable: The machine prints all RPCS and PCL jobs with a border on the edges of the
printable area.
1001 Bit Switch
5. System Maintenance Reference
94
To Next Page
Loading...
Need help?
General