Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-94 DS2000E Programming Guide
:CURSor:TRACk:AXValue?
:CURSor:TRACk:AYValue?
Syntax
:CURSor:TRACk:AXValue?
:CURSor:TRACk:AYValue?
Description
Query the X value at cursor A in track measurement with cursor.
Query the Y value at cursor A in track measurement with cursor.
Explanation
 For the horizontal position of cursor A, refer to the
:CURSor:TRACk:CAX command.
 For the vertical position of cursor A, refer to the
:CURSor:TRACk:CAY? command. The unit is
determined by the unit (refer to the
:CHANnel<n>:UNITs command) selected by the signal source
(refer to the
:CURSor:TRACk:SOURce1 command) of cursor A.
Return Format
The query returns the X or Y value at cursor A in track measurement with cursor in scientific notation.
When the Y value at cursor A exceeds the screen region, the :CURSor:TRACk:AYValue? command returns
9.9e37.
:CURSor:TRACk:BXValue?
:CURSor:TRACk:BYValue?
Syntax
:CURSor:TRACk:BXValue?
:CURSor:TRACk:BYValue?
Description
Query the X value at cursor B in track measurement with cursor.
Query the Y value at cursor B in track measurement with cursor.
Explanation
 For the horizontal position of cursor B, refer to the
:CURSor:TRACk:CBX command.
 For the vertical position of cursor B, refer to the
:CURSor:TRACk:CBY? command. The unit is
determined by the unit (refer to the
:CHANnel<n>:UNITs command) selected by the signal source
(refer to the
:CURSor:TRACk:SOURce2 command) of cursor B.
Return Format
The query returns the X or Y value at cursor B in track measurement with cursor in scientific notation.
When the Y value at cursor B exceeds the screen region, the :CURSor:TRACk:BYValue? command returns
9.9e37.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English