Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-184 DS2000E Programming Guide
:MEASure:VAMP
Syntax 1
:MEASure:VAMP <chan>
Description 1
Enable the amplitude measurement function of the specified channel.
Syntax 2
:MEASure:VAMP? <chan>
Description 2
Enable the amplitude measurement function of the specified channel and return the measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the signal source channel (refer to
the
:CHANnel<n>:UNITs command).
Return Format
The query returns the amplitude measurement result in scientific notation.
When the measurement result
is invalid, the query returns 9.9e37.
Example
:MEASure:VAMP CHANnel1
:MEASure:VAMP? CHANnel1
You can use the following commands to enable the amplitude measurement function of the specified
channel and the statistic function of the measurement results as well as query the statistic maximum
value, minimum value, current value, average value, and standard deviation of the amplitude
measurement results.
 :MEASure:VAMP:SMAXimum
 :MEASure:VAMP:SMINimum
 :MEASure:VAMP:SCURrent
 :MEASure:VAMP:SAVerage
 :MEASure:VAMP:SDEViation

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English