Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-185
:MEASure:VAMP:SMAXimum
:MEASure:VAMP:SMINimum
:MEASure:VAMP:SCURrent
:MEASure:VAMP:SAVerage
:MEASure:VAMP:SDEViation
Syntax 1
:MEASure:VAMP:SMAXimum <chan>
:MEASure:VAMP:SMINimum <chan>
:MEASure:VAMP:SCURrent <chan>
:MEASure:VAMP:SAVerage <chan>
:MEASure:VAMP:SDEViation <chan>
Description 1
Enable the amplitude measurement function of the specified channel and the statistic function of the
measurement results.
Syntax 2
:MEASure:VAMP:SMAXimum? <chan>
:MEASure:VAMP:SMINimum? <chan>
:MEASure:VAMP:SCURrent? <chan>
:MEASure:VAMP:SAVerage? <chan>
:MEASure:VAMP:SDEViation? <chan>
Description 2
Query the statistic maximum value (SMAXimum), minimum value (SMINimum), current value (SCURrent),
average value (SAVerage), or standard deviation (SDEViation) of the amplitude measurement results
when the amplitude measurement function of the specified channel and the statistic function of the
measurement results are enabled.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the signal source channel (refer to
the
:CHANnel<n>:UNITs command).
Return Format
The query returns the statistic maximum value, minimum value, current value, average value, or standard
deviation of the amplitude measurement results in scientific notation. When the measurement results are
invalid, the query returns 9.9e37.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English