Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-328 DS2000E Programming Guide
:WAVeform:STOP
Syntax
:WAVeform:STOP <stop>
:WAVeform:STOP?
Description
Set or query the stop point of waveform reading.
Parameter
Name Type Range Default
<stop> Integer
NORMal: 1 to 1400
MAXimum: 1 to the number of effective point currently on the
screen
RAW: 1 to the current maximum memory depth
1400
Explanation
 For the memory depth, refer to the
:ACQuire:MDEPth command.
 The range of the stop point is limited by the current mode of waveform data reading (refer to
the
:WAVeform:MODE command).
 When the waveform data in the internal memory are read, the range of start point (refer to
the
:WAVeform:STARt command) and stop point is related to the current maximum number of the
waveform points that can be read for a single time. For details, refer to descriptions in
the
:WAVeform:DATA? command.
Return Format
The query returns the stop point of waveform data reading in integer.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English