Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-40 DS2000E Programming Guide
:BUS<n>:CAN (Option)
 :BUS<n>:CAN:SOURce
 :BUS<n>:CAN:STYPe
 :BUS<n>:CAN:BAUD
 :BUS<n>:CAN:BUSer
 :BUS<n>:CAN:SPOint
 :BUS<n>:CAN:THReshold
 :BUS<n>:CAN:OFFSet
:BUS<n>:CAN:SOURce
Syntax
:BUS<n>:CAN:SOURce <sour>
:BUS<n>:CAN:SOURce?
Description
Set or query the channel source of CAN decoding on the specified bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<sour> Discrete {CHANnel1|CHANnel2} CHANnel1
Return Format
The query returns CHAN1 or CHAN2.
:BUS<n>:CAN:STYPe
Syntax
:BUS<n>:CAN:STYPe <stype>
:BUS<n>:CAN:STYPe?
Description
Set or query the signal type of CAN decoding on the specified bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<stype> Discrete {TX|RX|CANH|CANL|DIFFerential} RX
Return Format
The query returns TX, RX, CANH, CANL, or DIFF.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English