Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-228 DS2000E Programming Guide
:SYSTem:KEY:PRESs
Syntax
:SYSTem:KEY:PRESs <key>
Description
Press the specified key on the front panel of the oscilloscope.
Parameter
Name Type Range Default
<key> Discrete
{CH1|CH2|MATH|REF|DECode1|DECode2|AOFF|
MOFF|F1|F2|F3|F4|F5|F6|F7|QPRevious|QNEXt|
VPOSition|VPOSition1|VPOSition2|VSCale|VSCale1|
VSCale2|HSCale|HPOSition|HMENu|KFUNction|
TLEVel|TMENu|TFORce|TMODe|CLEar|AUTO|RSTop|
SINGle|QPRInt|MEASure|ACQuire|STORage|
CURSor|DISPlay|UTILity|HELP|SRECord|ERECord|
PPAuse|FFP10|FFP20|FFP30|FFP40|FFP50|
FFP60|FFP70|FFN10|FFN20|FFN30|FFN40|
FFN50|FFN60|FFN70}
--
Explanation
The ranges of <key> correspond to the keys on the front panel of the oscilloscope. The definitions are as
follows.
 CH1|CH2|MATH|REF|DECode1|DECode2|CLEar|AUTO|SINGle|MEASure|ACQuire|STORage|CURSor
|DISPlay|UTILity|HELP: press the corresponding key on the front panel.
 AOFF: turn off the analog channels and MATH channel.
 MOFF: hide or recover the display of the menu at the right of the screen.
 F1|F2|F3|F4|F5|F6|F7: press the 7 menu softkeys at the right of the screen.
 QPRevious|QNEXt: open the previous page or next page of the menu at the left of the screen.
 VPOSition|VPOSition1: press the CH1 vertical position knob; namely set the vertical position of CH1
to 0.
 VPOSition2: press the CH2 vertical position knob; namely set the vertical position of CH2 to 0.
 VSCale|VSCale1: press the CH1 vertical scale knob; namely switch between the coarse and fine
adjustment of the CH1 vertical scale.
 VSCale2: press the CH2 vertical scale knob; namely switch between the coarse and fine adjustment
of the CH2 vertical scale.
 HSCale: press the horizontal time base adjustment knob; namely turn on or off the sweep delay.
 HPOSition: press the horizontal position adjustment knob; namely set the horizontal position to 0.
 HMENu: press MENU in the horizontal control area.
 KFUNction: press the multifunction knob to set the waveform brightness to 50% (only valid when the
menu at the right side of the screen is hidden or the Display menu is opened).
 TLEVel: press the trigger level adjustment knob; namely set the trigger level to 0.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English