Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-261
:TRIGger:EDGe
 :TRIGger:EDGe:LEVel
 :TRIGger:EDGe:SLOPe
 :TRIGger:EDGe:SOURce
:TRIGger:EDGe:LEVel
Syntax
:TRIGger:EDGe:LEVel <level>
:TRIGger:EDGe:LEVel?
Description
Set or query the trigger level of edge trigger when the trigger source is CHANnel1, CHANnel2, or EXT. The
unit is the same with the current amplitude unit.
Parameter
Name Type Range Default
<level> Real
When the trigger source is CHANnel1 or CHANnel2:
(-5 x VerticalScale - OFFSet) to (+5 x VerticalScale - OFFSet)
When the trigger source is EXT: -4V to 4V
0
Note: For the VerticalScale, refer to the :CHANnel<n>:SCALe command. For the OFFSet, refer to
the
:CHANnel<n>:OFFSet command.
Explanation
 To set the trigger source of edge trigger, please refer to the
:TRIGger:EDGe:SOURce command.
 When the trigger source of edge trigger is ACLine, you do not need to set this parameter.
Return Format
The query returns the trigger level of edge trigger when the trigger source is CHANnel1, CHANnel2, or
EXT in scientific notation.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English