Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-317
 :WAVeform:SOURce
 :WAVeform:MODE
 :WAVeform:FORMat
 :WAVeform:POINts
 :WAVeform:DATA?
 :WAVeform:XINCrement?
 :WAVeform:XORigin?
 :WAVeform:XREFerence?
 :WAVeform:YINCrement?
 :WAVeform:YORigin?
 :WAVeform:YREFerence?
 :WAVeform:STARt
 :WAVeform:STOP
 :WAVeform:PREamble?
:WAVeform:SOURce
Syntax
:WAVeform:SOURce <source>
:WAVeform:SOURce?
Description
Set or query the channel source of waveform data reading.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2|MATH|FFT} CHANnel1
Explanation
The following two methods can be used to set FFT as the channel source for waveform data reading.
 Set <source> to FFT.
 Set the operation source of MATH to FFT and then set <source> to MATH.
Return Format
The query returns CHAN1, CHAN2, MATH, or FFT.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English