Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-123
:LAN:GATeway
Syntax
:LAN:GATeway <string>
:LAN:GATeway?
Description
Set or query the gateway.
Parameter
Name Type Range Default
<string> ASCII string Refer to Explanation --
Explanation
 The format of <string> is nnn,nnn,nnn,nnn. Wherein, the range of the first nnn is from 1 to 223
(except 127), and the ranges of the other three nnn are from 0 to 255.
 When you use this command, the IP configuration mode should be Auto IP (refer to the
:LAN:AUToip
command) or Static IP (refer to the
:LAN:MANual command).
Return Format
The query returns the current gateway in string.
:LAN:DNS
Syntax
:LAN:DNS <string>
:LAN:DNS?
Description
Set or query the DNS address.
Parameter
Name Type Range Default
<string> ASCII string Refer to Explanation --
Explanation
 The format of <string> is nnn,nnn,nnn,nnn. Wherein, the range of the first nnn is from 1 to 223
(except 127), and the ranges of the other three nnn are from 0 to 255.
 When you use this command, the IP configuration mode should be Auto IP (refer to the
:LAN:AUToip
command) or Static IP (refer to the
:LAN:MANual command).
Return Format
The query returns the current DNS address in string.

Rigol DS2000E Series Specifications

General

Bandwidth	70 MHz to 200 MHz
Channels	2 or 4
Vertical Sensitivity	1 mV/div to 10 V/div
Vertical Resolution	8-bit
Timebase Range	2 ns/div to 50 s/div
Memory Depth	14 Mpts
Input Impedance	1 MΩ ± 1%
Trigger Modes	Edge, Pulse, Video
Waveform Capture Rate	50, 000 wfm/s
Interfaces	USB, LAN
Power Supply	100-240 VAC
Display	8-inch WVGA (800x480) LCD