Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-17
:BUS<n>:EVENt
Syntax
:BUS<n>:EVENt <bool>
:BUS<n>:EVENt?
Description
Enable or disable the event table of the specified bus; or query the current status of the event table of the
specified bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Explanation
This command is only available when the displayof the specified bus is enabled (
:BUS<n>:DISPlay).
Return Format
The query returns 1 or 0.
:BUS<n>:EEXPort
Syntax
:BUS<n>:EEXPort
Description
Export the event table of the specified bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
Explanation
The data list can be exported to an external USB storage device in CSV format if an USB storage device is
currently connected.

Rigol DS2000E Series Specifications

General

Bandwidth	70 MHz to 200 MHz
Channels	2 or 4
Vertical Sensitivity	1 mV/div to 10 V/div
Vertical Resolution	8-bit
Timebase Range	2 ns/div to 50 s/div
Memory Depth	14 Mpts
Input Impedance	1 MΩ ± 1%
Trigger Modes	Edge, Pulse, Video
Waveform Capture Rate	50, 000 wfm/s
Interfaces	USB, LAN
Power Supply	100-240 VAC
Display	8-inch WVGA (800x480) LCD