Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-186 DS2000E Programming Guide
:MEASure:VAVG
Syntax 1
:MEASure:VAVG <chan>
Description 1
Enable the amplitude average measurement function of the specified channel.
Syntax 2
:MEASure:VAVG? <chan>
Description 2
Enable the amplitude average measurement function of the specified channel and return the
measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the signal source channel (refer to
the
:CHANnel<n>:UNITs command).
Return Format
The query returns the amplitude average measurement result in scientific notation. When the
measurement result is invalid, the query returns 9.9e37.
Example
:MEASure:VAVG CHANnel1
:MEASure:VAVG? CHANnel1
You can use the following commands to enable the amplitude average measurement function of the
specified channel and the statistic function of the measurement results as well as query the statistic
maximum value, minimum value, current value, average value, and standard deviation of the amplitude
average measurement results.
 :MEASure:VAVG:SMAXimum
 :MEASure:VAVG:SMINimum
 :MEASure:VAVG:SCURrent
 :MEASure:VAVG:SAVerage
 :MEASure:VAVG:SDEViation

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English