Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-15
:BUS<n> Commands
 :BUS<n>:MODE
 :BUS<n>:DISPlay
 :BUS<n>:FORMat
 :BUS<n>:EVENt
 :BUS<n>:EEXPort
 :BUS<n>:DATA?
 :BUS<n>:PARallel
 :BUS<n>:RS232 (Option)
 :BUS<n>:IIC (Option)
 :BUS<n>:SPI (Option)
 :BUS<n>:CAN (Option)
:BUS<n>:MODE
Syntax
:BUS<n>:MODE <mode>
:BUS<n>:MODE?
Description
Set or query the decoding mode of the specified bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<mode> Discrete {PARallel|RS232|IIC|SPI|CAN} PARallel
Explanation
RS232 decoding, I2C decoding, SPI decoding and CAN decoding are options and this command is only
valid when the corresponding options are installed.
Return Format
The query returns PAR, RS232, IIC, SPI, or CAN.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English