Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-181
:MEASure:RPHase:SMAXimum
:MEASure:RPHase:SMINimum
:MEASure:RPHase:SCURrent
:MEASure:RPHase:SAVerage
:MEASure:RPHase:SDEViation
Syntax 1
:MEASure:RPHase:SMAXimum <chanA>,<chanB>
:MEASure:RPHase:SMINimum <chanA>,<chanB>
:MEASure:RPHase:SCURrent <chanA>,<chanB>
:MEASure:RPHase:SAVerage <chanA>,<chanB>
:MEASure:RPHase:SDEViation <chanA>,<chanB>
Description 1
Enable the phase deviation (rising edge-rising edge) measurement function between the two specified
channels and the statistic function of the measurement results.
Syntax 2
:MEASure:RPHase:SMAXimum? <chanA>,<chanB>
:MEASure:RPHase:SMINimum? <chanA>,<chanB>
:MEASure:RPHase:SCURrent? <chanA>,<chanB>
:MEASure:RPHase:SAVerage? <chanA>,<chanB>
:MEASure:RPHase:SDEViation? <chanA>,<chanB>
Description 2
Query the statistic maximum value (SMAXimum), minimum value (SMINimum), current value (SCURrent),
average value (SAVerage), or standard deviation (SDEViation) of the phase deviation (rising edge-rising
edge) measurement results when the phase deviation (rising edge-rising edge) measurement function
between the two specified channels and the statistic function of the measurement results are enabled.
Parameter
Name Type Range Default
<chanA> Discrete {CHANnel1|CHANnel2} --
<chanB> Discrete {CHANnel1|CHANnel2} --
Return Format
The query returns the statistic maximum value, minimum value, current value, average value, or standard
deviation of the phase deviation (rising edge-rising edge) measurement results in scientific notation.
When the measurement results are invalid, the query returns 9.9e37.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English