6
Startup
Startup requirements
Operating Instructions – MOVIMOT
®
flexible
136
6.2 Startup requirements
Startup is only required when you need to change the factory set parameterization.
In this case, the following conditions apply to startup:
• You have installed the device correctly both mechanically and electrically.
• You have performed a correct project planning for the device.
• Safety measures prevent accidental startup of devices.
• Safety measures prevent danger to persons or machines.
Required hardware components:
• PC or laptop as specified in chapter "PC connection".
Required software:
• Engineering software MOVISUITE
®
standard by SEW‑EURODRIVE.
29129451/EN – 12/2019
To Next Page
Loading...
Need help?
General
