1-15
BEFORE USING THE MACHINEâ–ºBEFORE USING THE MACHINE
UNIVERSAL DESIGN IN THE MACHINE
The structure of the machine and the software are designed to allow all people to use the machine with ease.
UNIVERSAL DESIGN RELATED TO OPERATION
Grip handle on paper trays
The grip-type handles allow easy use from above or below. By simply placing your hand on a handle and gently pulling
forward, a tray can be withdrawn. The trays can be manipulated in a natural manner.
Changing of key response time
The response time of the keys can be changed as needed.
In "System Settings (administrator)", select [Operation Settings] → [Key Press Time] and [Disable Auto Key Repeat].
• Key Press Time
This setting is used to set the duration of time that a key must be pressed to take effect. The time can be set from 0 to
1.5 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented when a key is pressed accidentally. Keep in mind,
however, that when a longer setting is selected more care is required when pressing keys to ensure that key input is
registered.
• Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously not only each time the key is pressed but while a key is pressed.
UNIVERSAL DESIGN RELATED TO HEARING
Audible alert sounds when changing settings
When moving through copy ratio or exposure settings, the user is alerted by an audible sound at the default setting
(copy ratio 100%, exposure 3).
In "System Settings (administrator)", select [Operation Settings] → [Keys Touch Sound] and [Keys Touch Sound At
Initial Point].
• Keys Touch Sound
Controls the key touch sound level, or turns the sound off. You can also have three peeps sound at initial values when
setting the ratio in copy mode or when adjusting the exposure in any mode.
• Keys Touch Sound At Initial Point
When you specify the exposure in the exposure adjustment screen of each mode, a bleep sounds three times when
the reference value is reached.
Screen in which setting is effective Initial value
Ratio setting screen in base screen of copy mode Ratio 100%
To Next Page
Loading...
Need help?
General
