Sharp MX-B450W User Manual

7-9
SYSTEM SETTINGS►USING THE SYSTEM SETTINGS
USING THE SYSTEM SETTINGS
1
Press the [SPECIAL FUNCTION] key.
2
Select "System Settings" with the [ ] or [ ] key and press the [OK] key.
3
Enter the administrator PIN code with the numeric keys.
• " " appears for each digit that you enter.
• The mode selection screen appears.
4
Select the desired mode with the [ ] or [ ] key.
5
Press the [OK] key.
6
Select the desired setting with the [ ] or [ ] key.
7
Press the [OK] key and follow the instructions in the setting screen.
Several settings will have checkboxes in front of them. To enable a function (make a checkmark appear),
press the [OK] key. To disable the setting, press the [OK] once again to remove the checkmark. To
configure a setting that has a checkbox, go to step 8.
8
To use another setting for the same mode, select the desired setting with the
[] or [] key.
To use a setting for a different mode, press the [BACK] key and select the desired mode. To exit the system settings,
press the [CA] key.
Enter admin
PIN Code.
Admin PIN Code:
PIN
Initial Setting
Copier
Printer

Sharp MX-B450W Specifications

General

Brand	Sharp
Model	MX-B450W
Category	All in One Printer
Language	English