6-2
TROUBLESHOOTINGâ–ºTROUBLESHOOTING
This chapter describes troubleshooting and misfeed removal.
If you encounter a problem when using the machine, check the following troubleshooting guide before calling for service.
If you cannot resolve the problem using the troubleshooting guide, turn off the main switch, disconnect the power cord
from the power outlet, and contact your dealer.
NETWORK PROBLEMS
TROUBLESHOOTING
If you experience difficulty using the machine, check the following troubleshooting guide before calling for service.
Many problems can be easily resolved by the user. If you are unable to solve the problem using the
troubleshooting guide, turn off the power switch and unplug the machine, and contact your SHARP Service
Department.
"**-**" represents a code consisting of numbers and letters. When contacting your dealer, inform your dealer of the
code that is displayed.
Problem Cause and solution Page
The machine does not connect to the
network.
The LAN cable is disconnected.
→ Make sure that he LAN cable is firmly inserted in the connectors
on the machine and your computer. To connect the cable, see the
"Software setup guide".
1-3
Is the machine configured for use on the same network as the
computer?
→ The machine cannot be used if it is not connected to the same
network as the computer, or if it is not configured for use on the
network.
For more information, consult your network administrator.
–
To Next Page
Loading...
Need help?
General
