2-21
COPIERâ–ºSPECIAL MODES
COPYING BOTH SIDES OF A CARD AS A
SINGLE PAGE (CARD SHOT)
This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification purposes and helps save paper.
1
Press the [SPECIAL FUNCTION] key, select "Special Modes" with the [ ][ ]
keys, and press the [OK] key.
2
Select "Card Shot" with the [ ] [ ] keys and press the [OK] key.
3
Specify the card size in the Card Shot screen.
Select horizontal (X) or vertical (Y) with the [ ][ ] keys, specify the dimension with the
[ ][ ] keys, and press the [OK] key. Repeat for the other dimension.
• The horizontal and vertical dimensions can each be set to value from 1 to 8-1/2".
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with 2-Up / 4-Up copy, and ID card copy.
• The default settings for the horizontal and vertical dimensions in this screen can be set in Card Shot Default (page 7-17)
in
the system settings.
Back
Front
Example of a portrait copy
Example of a landscape copy
To Next Page
Loading...
Need help?
General
