Sharp MX-B450W User Manual

2-7
COPIER►BASIC PROCEDURE FOR MAKING COPIES
AUTOMATIC DUPLEX COPYING
The machine is capable of performing the following type of auto duplex copying. When copying, the machine will
automatically turn over the originals and paper, allowing you to make 2-sided copies with ease.
To change to the 2-sided copy screen, press the [DUPLEX] key on the operation panel with the base screen of copy
mode displayed.
Select "1 to 2", "2 to 2", or "2 to 1" with the [ ][ ] keys and press the [OK] key.
When scanning the original on the document glass, press the [START] key after scanning the front side, turn the original
over on the glass, and press the [START] key. Duplex copying starts.
To change the orientation of the copy image on the front and back sides of the paper, set "Binding Change" to "On" with
the [ ][ ] keys.
Original → Paper Usable paper
Document
glass
One-sided original → Two sides
8-1/2" x 14", 8-1/2" x 11", 5-1/2"
x 8-1/2"
(A4, B5, A5)
Document
feeder
One-sided original
→ Two sides
Duplex original
→ Two sides
Duplex original
→ One side
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 5-1/2" x 8-1/2"
(A4, B5, A5)
1
2
1
2
Portrait original
Orientation of the placed
original
Binding Change is
used
The top and bottom of the
images on the front and
back are reversed.
Binding Change is
not used
The top and bottom of the
images on the front and
back are the same.

Sharp MX-B450W Specifications

General

Brand	Sharp
Model	MX-B450W
Category	All in One Printer
Language	English