1-21
BEFORE USING THE MACHINEâ–ºLOADING PAPER
TRAY 1 - 2
A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 11" (A6 to A4) can be loaded into tray 1.
(150 sheets when the paper is A6)
A maximum of 600 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 14" (A5 to A4) can be loaded into tray 2.
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "TRAY
SETTINGS (page 1-29)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on
paper of a wrong size or type or paper misfeeds.
Do not place heavy objects on the tray or press down on the tray.
To set the paper type or size
Press the [SPECIAL FUNCTION] key and set in [Paper Size Set] or [Paper Type Setup].
â–ºTRAY SETTINGS (page 1-29)
1
Tray 1
Tray 2
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of
paper, go to the next step.
When using the tray 1, push the center of the pressure plate down until it locks into place.
To Next Page
Loading...
Need help?
General
