96 / 100
Siemens Commissioning Guide CM1G5192en
Building Technologies 11 10BAppendix 29.07.2010
11 Appendix
11.1 Applicable standards
European low-voltage guideline
The SED2 product range corresponds to the requirements of the low-voltage
guideline 73/23/EEC, supplemented by guideline 98/68/EEC. The devices have
been certified to the following standards:
EN 60146-1-1 Semiconductor inverters – General requirements and line
commutated inverters
EN 60204-1 Safety of machinery – Electrical equipment of machines
European guideline for machinery
This guideline does not apply to the SED2 VSD product series. The products
were tested comprehensively and evaluated for adherence to important
guidelines pertaining to health and safety in a typical application. A declaration
of conformity will be provided on request.
European EMC guideline
If installed according to the recommendations issued in this Commissioning
Guide, the SED2 satisfies all EMC guideline requirements as defined in the
EMC Product Standard for Power Drive Systems (EN 61800-3).
Underwriters Laboratories
Frequency inverter devices 5B33 approved by UL and CUL for use in pollution
class 2 environments.
ISO 9001
Siemens SBT applies a quality management system in compliance with
ISO 9001.
To Next Page
Loading...
Need help?
General