1.5 Nameplate layout
① Article number ④ DataMatrix Code ECC 200
② Serial number ⑤ Date of manufacture
③ Revision status
The nameplate with the article number and other important information on the rack-
mounted device is located on the left side of the enclosure exterior and on the wall-mounted
device on top of the enclosure exterior.
1.6 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarication.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
1.7 Designated use
Use the device in accordance with the information on the nameplate and in the Technical data
(Page87).
Introduction
1.7Designated use
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB 11
To Next Page
Loading...
Need help?
General
