Introduction
1
1.1 Purpose of this documentation
These instructions are a brief summary of important features, functions and safety information,
and contain all information required for safe use of the device. Read the instructions carefully
prior to installation and commissioning. In order to use the device correctly, rst review its
principle of operation.
The instructions are aimed at persons who install and commission the device.
To realize optimum performance from the device, read the complete operating instructions.
See also
Ex pz safety equipment (Page115)
1.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remark
10/2014 First edition
05/2015 Expansion commissioning. Correction of the internal document links
05/2018 Expansion with new Ex analyzer modules:
• ULTRAMAT 7 and CALOMAT 7
• OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Expansion and updating of the document
11/2019 OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Updating the document
01/2022 General update of the document
05/2023 Expansion and updating of the document
Merging with SIPROCESS GA700 Quick Start
Adding content for PROFIBUS, CSA certicate, MiniPurge
1.3 Purpose
The device is designed for the concentration analysis of gases in gas mixtures. Depending on the
installed analyzer module, dierent gases can be examined.
Use the device only for measuring/analysis of gas concentrations in gas mixtures according to
the information in section"Technical data (Page87)".
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB 7
To Next Page
Loading...
Need help?
General
