Siemens SIPROCESS GA700 Compact Operating Instructions

3.4.2 Device-speci󹪝c safety instructions
NOTICE
Insu󹪟cient air circulation around the device
Device damage
The device may overheat in case of heat accumulation.
• Make sure that su󹪟cient air circulates around the rack-mounted device.
• Do not cover the ventilation slit.
• If you install more than one rack-mounted device, maintain a clearance of one height unit
(4.5cm) to the next device.
Note
Installation in control cabinets
• Make sure there is adequate ventilation between the devices when installing in control
cabinets.
• Make sure that the permitted ambient temperature listed in the technical speci󹪝cations is not
exceeded.
Dimension drawing
The following 󹪝gure shows the dimensions of the rack-mounted device and the distance of the
fastening holes at the mounting brackets. The dimensions are speci󹪝ed in millimeters (inches).
Installing/mounting
3.4Rack-mounted device
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB 33

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English