2-3-4. LE-425 Board
Preparation
1. Remove the top cover. (Refer to “2-2. Top Cover”.)
2. Remove the front panel assembly. (Refer to “2-3-1. Front Panel Assembly”.)
Procedure
1. Disconnect the harness from the connector (CN001) on the LE-425 board.
2. Remove the screw, and then remove the LE-425 board.
PSW
3 x 8
Front side
Front panel assembly
LE-425 board
Harness
Pin
CN001
3. Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
2-6