204
Grid
Displays a grid on the monitor screen. It is enabled when
set
ting the position of an image in two-dimensional space.
Scale (reduced display)
The size is reduced to display the range that is not
di
splayed on the normal monitor screen. This allows you
to check the position of an image in a larger space. The
range displayed on a normal monitor screen is indicated
by a frame.
Automatically erasing the graphics display
This automatically erases the graphics display when an
effect
timeline is executed. You can set the timing for
when to redisplay graphics after the effect timeline has
completed.
Setting a Graphic
This section describes the menu for DME channel 1 as an
example.
1
Open the Home > DME > Channel1 > Input/Output >
Graphic menu (15101.04).
2
Set the [Graphic] button to the on state.
3
In the [Graphic Type] group, select a type of graphic.
Axis: C
oordinate axes
Axis Name: Axis name
s
Ch ID: Ch
annel ID
Wire Frame: W
ire frame
Grid: Gri
d
To reduce the display size of graphics display
Set the [Scale] button to the on state and set the following
p
arameter.
To automatically erase the graphics display
w
hen an effect timeline is executed
Set the [Auto Erase] button to the on state and set the
f
ollowing parameter.
Wire frame
Range displayed on
normal monitor screen
No. Parameter Adjustment
1 Scale Degree of scale reduction
No. Parameter Adjustment
1 Recover Time Time for redisplaying graphics
aft
er an effect timeline has
completed
To Next Page
Loading...
Need help?
General
