475
The MZS-X1500 4K Upgrade License is assigned/
released for each switcher and is applied collectively to
the boxes configured in each switcher.
1
Open the MLS Manager Home > System > Island >
Assign Licenses menu (60211.08).
2
Select the target switcher or box to set.
Place a check mark for the target switcher or box to
set
(multiple selection supported).
To select and set all switchers or boxes, place a check
mar
k in the Select All checkbox.
3
Press the [Edit] button.
The [Edit Licenses] window appears.
4
Press the [Assign] button for the licenses to assign.
To release a license assignment
Press the [Release] button.
5
Press [OK].
To display the properties of an assigned license
Press the [Display Properties] button.
Configuring Initial Setup
You can specify the setup/content package archive file to
load/import when a switcher in an island reboots after
changing the switcher settings.
When a package archive file is specified, all package files
on
the current switcher are deleted.
1
Open the MLS Manager Home > System > Island >
Initial Setup menu (60211.09).
2
Press the [Select] button on the target switcher to set.
The [Select Initial Setup Archive File] window
ap
pears.
3
Select the target package archive file.
4
Press [OK].
5
Set the detailed options for when importing/loading a
package archive file.
[Load Setup] button:
Specify whether to load the
setup data, register data, and system
configuration data from the selected package
archive file.
• Control panel setup data is loaded into both the
co
ntrol panels with panel ID of 1 and 2.
• When loading files in batch, as described in
“Batch File Operations” (page 334), user
account system configuration data is not
l
oaded, however, user account system
configuration data is also loaded for the island
configuration.
[Import Content] button: Sp
ecify whether to import
the content data from the selected package
archive file.
[Load Content] button: Sp
ecify whether to load the
content data from the selected package archive
file.
When the [Import Content] button is on, all content
dat
a in the package archive files on the current
switcher are deleted.
6
Enable/disable the ELC-MVS01 support function of
the switcher using the [ELC-MVS01 Support] button.
On: En
able the ELC-MVS01 support function of the
switcher.
Off:
Disable the ELC-MVS01 support function of the
switcher.
To release the specified package archive file to
lo
ad or import
Select the target package archive file to release and press
t
he [×] button.
Checking and Applying an Island
Configuration
You can check the configuration information and
specifications of each device in an island using the MLS
Manager Home > System > Island > Apply Config menu
(60211.12).
Applying the configuration
After checking the configuration information of each
device on the configuration display screen
([Configuration] tab), check all the changed settings in
the island (rows with marks indicating settings not yet
applied) in each menu in MLS Manager Home > System
> Island, and apply the configuration to the devices.
Note
Note
Notes
Note
To Next Page
Loading...
Need help?
General
