214
4
In the [Side H Rotation] group, set the angle of
rotation of the image on side H.
0: No
rotation
90: 90° r
otation
180: 18
0° rotation
270: 27
0° rotation
5
In the [Side V] group, select how to fit the image on
side V.
Configure in the same way as for side H.
6
In the [Side V Rotation] group, set the angle of
rotation of the image on side V.
Configure in the same way as for side H.
To invert the image on the front side
In the [Side H Front] group for side H or [Side V Front]
gr
oup for side V, select the direction of inversion.
Invert H: I
nvert horizontally.
Invert V: I
nvert vertically.
To invert the image on the back side
In the [Side H Back] group for side H or [Side V Back]
gr
oup for side V, select the direction of inversion.
Invert H: I
nvert horizontally.
Invert V: I
nvert vertically.
Setting a Shadow
You can add a shadow to the image using two DME
channels.
The channel with the higher number from among the two
cha
nnels is used as the shadow.
The following channels can be used as the shadow,
dep
ending on which channels (Ch1 to Ch4) are combined.
a: Shadow can be set
This section describes setting a shadow on channel 1 as an
exampl
e.
1
Open the Home > DME > Global Effect > Shadow
menu (15109.31).
2
Set the [Ch 1 Shadow] button to the on state and set
the following parameters.
3
In the [Ch 1 Shadow Source] group, select a signal to
insert in the shadow.
Video: C
hannel 2 input video signal
Flat Color: Si
ngle color
When the [Flat Color] button is selected, set the
fo
llowing parameters.
To set a shadow on a channel other than channel 1, do the
f
ollowing.
To set a shadow on channel 2:
Set using the [Ch 2 Shadow] button and [Ch 2
Sh
adow Source] group.
Channel 3 is used as the shadow.
To set a shadow on channel 3:
Set using the [Ch 3 Shadow] button and [Ch 3
Sh
adow Source] group.
Channel 4 is used as the shadow.
Setting a shadow using channels 1 to 3 (Ch1 +
Ch
2 + Ch3)
Set a “Ch1 + Ch2 + Ch3” combine, set the [Ch 1 + Ch 2
Shad
ow] button to the on state, and perform the
following.
No. Parameter Adjustment
1 Top Position of top edge
2 Left Position of left edge
3 Right Position of right edge
4 Bottom Position of bottom edge
Channel Shadow setting
Ch1 Ch2 Ch3 Ch1 + Ch2 Ch2 + Ch3
Ch1 + Ch2 a – – – –
Ch2 + Ch3 – a – – –
Ch3 + Ch4 – – a – –
Ch1 + Ch2,
Ch
3 + Ch4
a – a – –
Ch1 + Ch2
+ Ch3
a a – a –
Ch2 + Ch3
+ Ch4
– a a – a
Ch1 + Ch2
+ Ch3
+
Ch4
a a a a –
No. Parameter Adjustment
1 Position H Shadow position in the
ho
rizontal direction
2 Position V Shadow position in the
v
ertical direction
3 Density Density of shadow
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
Channel Shadow setting
Ch1 Ch2 Ch3 Ch1 + Ch2 Ch2 + Ch3
To Next Page
Loading...
Need help?
General
