Sony ICP-X1116 User Manual

30
For details about the content name display of keys, see
“Setting Logical V/K Pair Names/Source Names and
Destination Names” (page 416) and “Setting a Logical
V/K Pair” (page 381).
Flexi Pad Control Block
The Flexi Pad control block is used for recalling and
saving snapshots, wipe snapshots, DME wipe snapshots,
and key snapshots, for recalling and creating macros, for
recalling shotboxes, for entering the transition rate, and
for other tasks.
a M
ode selection buttons / operation buttons / bank
selection buttons (assignable buttons)
You can assign mode/bank selection buttons and
op
eration buttons in the Home > Setup > Panel > Module
> Button Assign menu (19104.21).
For details about assigning buttons, see “Assigning
Control Panel Buttons” (page 402).
Mode selection buttons
[UNDO] button / [DEL] button
• The [UNDO] button and [DEL] button cannot be used
in
shotbox operation mode.
Function
name
Button
name
Description
Key KEY Switches to key operation mode.
In key operation mode, you can
ca
rry out the following
operations.
• Saving and recalling key
sn
apshots
• Selecting independent key
transition type
• Selecting the key fill signal or
ke
y source signal in the cross-
point control block
b
a
Wipe WIPE Switches to wipe snapshot
operation mode.
In wipe snapshot operation
m
ode, you can save and recall a
wipe snapshot and select a wipe
pattern.
DME Wipe DME
WI
PE
Switches to DME wipe snapshot
operation mode.
In DME wipe snapshot operation
m
ode, you can save and recall a
DME wipe snapshot and select a
DME wipe pattern.
Snapshot
SNAPSHOT Switches to snapshot operation
mode.
In snapshot operation mode, you
c
an save and recall snapshots,
and add attributes.
Shotbox SHOTBOX Switches to shotbox operation
mo
de.
In shotbox operation mode, you
c
an recall and execute
shotboxes.
Macro MCRO Switches to macro operation
mo
de.
In macro operation mode, press
a
nd hold the [MCRO] button and
press a button (for the target
register) in the memory recall
section to enter edit mode.
In macro operation mode, you
c
an save, recall, and edit macros.
Transition
Ra
te
TRANS
RATE
Switches to transition rate
operation mode.
In transition rate operation mode,
y
ou can enter a transition rate.
Function
name
Button
name
Description
Undo UNDO After recalling a register, returns
to
the state before the register
was recalled.
Delete DEL Press and hold the [DEL] button
a
nd press a register button in the
memory recall section to delete
the register data.
Notes
Function
name
Button
name
Description

Sony ICP-X1116 Specifications

General

Brand	Sony
Model	ICP-X1116
Category	Switch
Language	English