Sony ICP-X1116 User Manual

27
d Independent key transition execution section
Independent key transition execution buttons
(a
ssignable buttons)
You can assign execution buttons for independent key
t
ransitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see “Assigning
Control Panel Buttons” (page 402).
The [KEYx ON] button (x = 1 to 8) and the [AUTO
T
RANS] button for the same key are assigned as a set.
Display
Displays the following information for each key assigned
to
an independent key transition execution button.
• Key content name (key source name when a key source
is
selected on a cross-point control block key bus)
• Currently used DME channel or resizer
• Transition rate
• Transition type
For details about the content name display of keys, see
“Setting Logical V/K Pair Names/Source Names and
Destination Names” (page 416) and “Setting a Logical
V/K Pair” (page 381).
Transition Control Block (Simple Type)
The simple-type transition control block is used to
execute background transitions.
For details, see “Chapter 5 Transitions” (page 94).
Display
Independent key transition execution buttons
Function
name
Button
name
Description
Key 1
Tran
sition
to Key 8
Transition
KEY1 ON
t
o KEY8
ON
Inserts or removes a key
i
nstantaneously.
If a key is currently inserted, the
b
utton is lit amber.
AUTO
TR
ANS
Inserts or removes a key
automatically with the set
transition rate and transition type.
During the transition, the button
is
lit amber.
Note
a
a
a
b
c

Sony ICP-X1116 Specifications

General

Brand	Sony
Model	ICP-X1116
Category	Switch
Language	English