328
For details about setting an effect timeline, see “Effect
Timeline Operations (Menu)” (page 262).
1
Open the Home > Register > Macro > Timeline >
Action menu (18307.41).
2
In the [Action] group, select an action to set.
No Action: D
o not set an action.
Recall: Recal
l a macro register.
Take: E
xecute a macro.
All Take: E
xecute all macros.
When the [Recall] button or [Take] button is selected,
sel
ect the target register to recall/execute in the list on
the right, and press the [Set] button.
To search for a register
Press the [Search] button, enter a character string to
sear
ch for in the input field in the displayed window, and
press the [Enter] button.
Only registers containing the entered character string are
di
splayed.
Setting an action when rewind is executed
On a macro timeline, normally when the [REWIND]
button is pressed, an action set for the first keyframe is not
executed. When the [RUN] button is pressed, then the
first keyframe action is executed.
To execute a specific action when the [REWIND] button
i
s pressed, set a rewind action.
The rewind action is enabled when you press the
[RE
WIND] button, even if you have configured an action
for the first keyframe to be executed after rewinding.
For details, see “Setting the operation of the first
keyframe when rewind is executed” (page 421).
1
Open the Home > Register > Macro > Timeline >
Rewind Action menu (18307.42).
2
In the [Action] group, select an action to set.
No Action: D
o not set an action.
Recall: Recal
l a macro register.
When the [Recall] button is selected, select the target
reg
ister to recall in the list on the right, and press the
[Set] button.
To search for a register
Press the [Search] button, enter a character string to
sear
ch for in the input field in the displayed window, and
press the [Enter] button.
Only registers containing the entered character string are
di
splayed.
Note
To Next Page
Loading...
Need help?
General
