Stiga PARK PRO 340 IX User Manual

Edition
2018
Workshop Manual
PARK PRO 340 IX
Chapter
1 General instructions
Page
12
1.5.1 General safety checks
Object Result
Fuel lines and connections. No leaks.
Power cables.
All insulation intact.
No mechanical damage.
Exhaust system.
No leakage at the joins.
All screws tightened.
Test drive.
No abnormal vibrations.
No abnormal noise.
1.5.2 Electrical safety check
Status Action Result
Driver not seated.
Parking brake engaged.
Try to start the engine.
The motor does not start.
On the display (if present)
the message “SIT DOWN”
appears.
Driver not seated.
Parking brake disengaged.
Try to start the engine.
The motor does not start.
On the display (if present) the
message “PRESS BRAKE"
appears.
Driver seated.
Parking brake engaged.
Try to start the engine. The engine starts.
Engine on, cutting device
disengaged, parking brake
engaged.
The driver gets up
from the seat.
The engine stays on.
Tyre, air pressure
Check the tyre pressure. Adjust if necessary. The recommended tyre pressure is 0.6 bar
for front tyres and 0.4 bar for rear tyres.
Engine oil
See the manual provided by the engine manufacturer.
Drive belts, check
Check the condition of all the belts and tensioners
5.1
Steering, adjustment
See chapter 3
3.
Engine air lter
Consult the “INSTRUCTION MANUAL” supplied with the machine. Also see the manual
provided by the engine manufacturer.

Stiga PARK PRO 340 IX Specifications

General

Brand	Stiga
Model	PARK PRO 340 IX
Category	Lawn and Garden Equipment
Language	English